The standing seam metal roof is one
of the most exciting breakthroughs in roofing technology in the last
25 years. It fulfills the
building owner’s need for beautiful, durable, puncture-resistant
protection against the weather, while working in concert with the
forces of nature. The
panel fastening system is uniquely designed to handle the potentially
damaging effects of thermal movement.
Precisely-formed metal panels are locked in place by clips
inside a raised seam standing above the roof’s flat surface,
allowing water to run off without seeping between the panels.
The clips have a moveable feature allowing the panel to expand
and contract with temperature changes.
The concealed clip means no through-the-panel fasteners,
reducing any chance of leaks because there are no holes in the
roof panels.
Our standing seam roof panels are
roll-formed at the job site using the state-of-the-art computerized
Schleback Quadro Plus rollformer to insure proper length and correct
panel coverage. Companion
items such as drip edge, ridge cap, hip cap, gable trim, chimney
flashing, wall flashing etc. are fabricated in our shop using the Schechtl
Max computerized brake. On
our trim metal, we use the same quality and color material as the roof
panels. Everything is
fabricated by our professional technicians using our computerized,
efficient, modern equipment to suit the individual project.
|
